网站描述
UKCT-LTD - UK Construction Technologies LTD - Masonry Repair - Flooring & Surface Treatments - Waterproofing - Admixtures - Concrete Repair & Protection - Corrosion Control - Distributor of Global Brands of Construction Chemicals - deliver the latest technologies in the construction industry - Betonfix 300 is a ready-to-use cement-based mortar which is strongly adhesive to the substrate, waterproof even in thin layers, quick and easy to apply. Adaptable to smalldeformities in the structure. It does not contain chlorides or aggressive agents which could cause corrosion. It is a perfect sealing agent for porous surfaces and cracks in the substrate. - UK Monofix FB1 UK-Monofix FB1 is a cementitious, silica fume and corrosion inhibitor containing, polymer modified, one-component coating material used as bonding slurry and corrosion protection primer for inforcement. - UK Monofix FB2 UK-Monofix FB2 is a rheoplastic mortar for structure repairs with compensated shrinkage and normal setting time (60-90 minutes). It is a ready to use cement mixture that, after mixing with water, is applicable by spray machines and fully workable by trowel and with normal tools for the application for render. Applied coats of the product when hardened will have very good adhesion, durability, impermeability and exceptional mechanical strength. This product does not contain expansive metallic elements - UK Monofix FB3 UK-Monofix FB3 is a cementitious, silica fume containing, polymer modified one- component, pore sealer and finishing coat mortar - Kimistone K10 Protective, consolidant product based on acrylate siloxane copolymers. - Kimitech EP-RG Kimitech EP-RG is a dense, high adhesive power, single-component resin for cement and lime; the product confers strong adhesive properties, waterrepellence and elasticity to the mixture ensuring the adhesion even of thin patch layers (10-15 mm). After setting, Kimitech EP-RG cannot be resoftened with water. Kimitech EP-RG is 100% water and alkali-resistant; it delays the onset of setting, ensuring themixture cures better - Limepor 100 Limepor 100 is an injection mix containing natural hydraulic lime (NHL) with the addition of natural pozzolan and carbonate filler. This mix was specially designed for the restoration and pre-consolidation of cavitywalls and brick or stone foundations by means of injection techniques. Limepor 100 has low water-soluble salt content which makes it physically and chemically compatible with the original components of walls with similar mechanical properties. - Limepor MT Limepor MT is a ready-to-use mortar containing natural hydraulic lime NHL, natural pozzolans and inert siliceous materials with a maximum granulometry of 3 mm. Limepor MT is suitable for creating plasters/renders, breakfill work, building and pointing of brick or stone facades. Limepor MT has low of watersoluble salt content and is physically and chemically compatible with the components used in historic masonry. - Soluzione P Soluzione P is a single component, ready to use formula with a base of buffer acids. It is used in the building trade as a chemical treatment to eliminate cement mortar residues. - Hardac weber.tec acrylic sealer is a low-viscosity, colourless, penetrating sealer. The product is based on a pure acrylic resin in aromatic solvents. The concept is to achieve an in-surface seal with no material build-up. For severely exposed surfaces, one coat of weber.tec aquapel WR prior to 2 coats of weber.tec acrylic sealer is recommended. - VpCI™ CorrVerter® VpCI™ CorrVerter® is a water-based rust converter and primer recommended for application to rusty or poorly prepared steel surfaces where further corrosion protection is required and good surface preparation is difficult to achieve. VpCI™ CorrVerter® is formulated to penetrate rust, eliminate rust, penetrate to the bare metal, and stop further rusting. - MCI-2021 MCI-2021 is a concrete sealer that combines a blend of reactive silicates, surface-active agents, and Cortec’s time-proven Migratory Corrosion Inhibitors (MCI®). MCI-2021 preserves and protects concrete by working with the chemistry of concrete. The reactive silicates penetrate the concrete up to 11/2 inches (3.75 cm) and react with calcium. The reaction products build additional insoluble silicate structures within the concrete. The newly built structure seals surface pores and creates a water repellent surface preventing carbonation and further intrusion of chloride. - MCI-2020 MCI® -2020 is a surface applied corrosion inhibitor designed to migrate through even the densest concrete structures and seek out the steel reinforcement bars in concrete. MCI® -2020 also protects a multitude of metals including carbon steel, galvanized steel and aluminum. The unique feature of Migrating Corrosion Inhibitors™ (MCI®) is that if not in direct contact with metals, the inhibitor will migrate a considerable distance through concrete to provide protection. - info@ukct-ltd.com London Amir Sahranavard Unit. 307,315 Chiswick High Road, London, United Kingdom Email: Amir.sahranavard@ukct-ltd.com Tel: (+44) 208 946 2394 Mobile: (+44) 782 826 7730 Alireza Nourmand Unit. 307,315 Chiswick High Road, London, United Kingdom Email: Alireza.nourmand@ukct-ltd.com Tel: (+44) 208 946 2394 Mobile: (+44) 782 826 7730 Turkey UK Construction Kazem Sahranavard AYDEDE, CAD.BAYLAN, APT.NO:11, KAT:2, APT.NO:8, Talimhane, Taksim, Istanbul Tel : (+90) 212 238 3115 Fax : (+90) 212 238 3215 - alireza hajiaghaei